Skip to main content

Perception Lab

How to use Perception Lab
experiments
behavioral
Author

NZ

Published

16 Nov 2026

Modified

16 Nov 2026

Lab calendar

https://sharepoint.uni-graz.at/sites/602/arbeitsbereiche/allgpsy/Lists/Audio%20und%20Wahrnehmungslabor/calendar.aspx

Before the experiment

Switching the equipment on

  • Turn on two power splitters, one in the subject cabin and one in the experimenter control room

    • Make sure the big monitor inside the subject room is making noises. From this time onward it takes 20 minutes for it to reach a steady state (if you care/have color or luminance-sensitive experiments)
  • Turn on the big black computer labelled “Linux” under the table

  • Set the switch between the two monitors to “2” (position labelled “Linux”)

  • Log in as allg_user (password under the monitor)

  • Set the relevant XOrg configuration

    • For PsychoPy:

    • For PsychToolbox: the subject monitor is black if you are not running an experiment. This is normal

During the experiment

  • Use the big black gaming keyboard to collect subject responses

  • Ideally we should not move any equipment inside except for the chin rest and the chair

After the experiment (important!)

  • Shut down the Linux computer

  • Turn off both power splitters

Back to top